A useful product photograph answers a specific question. It may show a label, a connection, a mounting feature or the overall shape of the part. Several clear views are usually easier to review than one collage with small, unreadable details.
For a B2B enquiry, treat photographs and typed references as a single information package. The aim is to help the supplier understand what you have and which details you need confirmed.
Begin with one overall view
Place the component against a plain background with enough light to show its outline. Keep the full item inside the frame and avoid covering its mounting points with your hand. For an assembly, identify any loose accessory that appears beside it.
Do not alter the shape or remove a physical feature from the photograph. A cleaner image is helpful only if it remains an accurate record of the component you want to discuss.
Capture the details that distinguish the part
Take separate close-ups of the identification label, electrical plug, pipe connections and mounting areas where those features are relevant. Keep the camera close enough for the text or feature to be readable, but retain enough surrounding detail to show where it sits on the part.
- For a label, take one square-on photograph without glare.
- For a connector, show its shape and the visible pin arrangement.
- For a mounting point, show its position relative to the assembly.
- For a dimension, show the measurement endpoints and unit.
Type the numbers without interpreting them
Copy visible reference numbers exactly into your enquiry and explain where each one was found. Distinguish an OE number from your own stock code and from a number copied from a supplier listing.
If a character is unclear, mark it as uncertain and point to the original photograph. Guessing a missing character may make a request look more complete while introducing a new ambiguity.
Keep filenames and revisions organised
Use a stable line number for each item. Put the same number in the RFQ and at the beginning of related filenames, followed by a short view description such as label, front or connector.
If you replace an image, explain which earlier file it supersedes. Keep one current reference set so the quotation is not reviewed against two different versions of the part.
Combine the images with the buying brief
Photographs should accompany the component description, relevant vehicle information, requested quantity and destination. Tell the supplier whether you are seeking a specific replacement, reviewing a catalogue alternative or planning a wider stock range.
Start with an existing BOSCO catalogue reference and include these details in your enquiry message. For a larger photo set or spreadsheet, use the sales email shown on the contact page. Keep final fitment and specification decisions tied to the exact item agreed for the order.
A mixed request for quotation can include compressors, heat exchangers, airflow parts, hoses and smaller service components. The challenge is keeping the specification and quantity for each line clear as the discussion moves between buyer and supplier.
A structured RFQ gives both sides one shared document to review. It also gives your purchasing team a way to record which details have been confirmed and which are still open.
Give every line a stable identifier
Start with a line number or your own stock code, followed by a short component description. Keep that identifier unchanged when you send revised quantities or new photographs. Changing line numbers between versions makes comparisons harder.
Use separate columns for your internal code, a catalogue reference and an OE number. If a field is unknown, leave it clearly marked as unknown instead of copying a nearby number into it.
Connect quantities to the correct specification
Record the quantity for each individual reference and state the unit: pieces, assemblies or sets, as appropriate to your request. Where the scope of a set is unclear, list the components you expect it to contain.
If the enquiry includes alternative quantities, label them as quotation options. A buyer may want to compare a trial quantity with a later replenishment quantity. These are commercial scenarios to discuss, rather than two quantities to add together.
Keep supporting files traceable
Name photographs and drawings with the line identifier. A simple naming pattern such as line-01-label and line-01-connections helps the recipient understand which view belongs to which item.
Send the original file when possible. If a photo has been annotated, retain an unmarked copy so that connector shapes, labels and mounting details remain visible. Explain whether dimensions came from a physical measurement, a drawing or an old product listing.
Add order-level requirements once
Destination country, delivery location, preferred transport discussion and business contact details usually apply to the whole request. Put them in a clearly labelled section rather than repeating them inconsistently on every line.
- Destination market and receiving location.
- Required timing, described as your requested schedule.
- Packaging, carton marks or receiving-label requirements to review.
- Any documents your purchasing or receiving process needs.
Prices, minimum quantities, packaging arrangements and lead times need to be agreed for the particular references and order. An RFQ should ask for these details rather than assume that a general website statement settles them.
Close the open questions before ordering
Keep a column for confirmation status and outstanding questions. Before placing an order, review the specification, supply scope, quantity, commercial terms and delivery arrangement against the latest agreed document.
Download the BOSCO RFQ template for a starting format. You can also browse the product catalogue, collect references in your enquiry list and send them through the contact page. Use the sourcing support guide to see which details to prepare next.
Condensers and evaporators both belong to an automotive A/C system, but they perform different jobs and should be clearly identified in a buying request. Using the correct component name helps keep drawings, photographs and quotation lines organised.
The checklist below is intended for importers and distributors collecting product information. It does not replace the vehicle manufacturer’s application information or a qualified technician’s inspection.
Recognise the two component types
A condenser releases heat to the outside air as part of the refrigerant circuit. An evaporator absorbs heat from the air being cooled for the passenger compartment. DENSO describes these complementary functions in its A/C component overview.
That difference explains why a general request for an A/C radiator can be unclear. Name the part as a condenser or an evaporator, and attach a photograph of the exact item you want to discuss.
Use separate fields for separate measurements
When dimensions are available, identify what you measured. Core width, overall width, height and thickness are not interchangeable fields. State the unit of measurement and make clear whether mounting brackets, tanks or pipe extensions are included.
A photograph showing the measurement points can be more useful than a list of numbers without context. If you are working from a drawing, include its revision or date so the supplier can distinguish it from an earlier version.
Show the connection and mounting details
Photograph the inlet and outlet connections, mounting tabs, bracket positions and pipe orientation. A front-facing image may show the size of a heat exchanger while hiding the interfaces that need to be compared.
- Send an overall view and close-ups of both connections.
- Show the part from the same orientation in each photograph.
- Identify any additional item shown in the image that you do not intend to order.
- Record uncertain or unreadable details as questions for review.
Connect the part to an application
Include the OE number when available, plus the vehicle make, model, production year and relevant engine information. If the enquiry relates to an existing stock item, add your internal stock code separately from the supplier or vehicle-manufacturer reference.
A make name alone is a broad catalogue filter. It should not be used as the only evidence that a particular heat exchanger will match a vehicle. Keep application information and physical details together in the same enquiry line.
Make the quotation scope clear
Tell the supplier the required quantity, destination market and whether the request is for a specific replacement or a stock-range review. List any packaging or labelling requirements that matter to your receiving process.
Compare the catalogue groups for condensers and evaporators, then use one product enquiry to discuss the selected references. Keep the final dimensions, connections and application confirmation with the agreed order details.
Two compressors can look similar in a catalogue photograph and still require a closer comparison. For a wholesale enquiry, the most useful starting point is a record of the original component, supported by vehicle information and a clear statement of what you want to buy.
This guide explains how to prepare that information for a supplier. It is a purchasing checklist, rather than a vehicle repair or installation procedure.
Start with the label and the OE reference
Take a clear photograph of every label on the existing compressor. Keep the original image and also type the numbers into your enquiry. Copy letters, spaces, suffixes and punctuation exactly, and identify which number came from which label or document.
For example, Sanden explains that its compressor part number is shown under the model-number field on its label. Label formats vary between manufacturers, so avoid assuming that the largest printed number is always the orderable reference.
If you have an OE number from a vehicle parts catalogue, include it as a separate field. A supplier reference, a compressor family designation and an OE number should not be silently combined into a single identifier.
Add the vehicle information
List the vehicle make, model, production year and engine information available to you. State the market in which the vehicle was sold if you know it. When a supplier needs VIN information to review an application, share it through the business enquiry channel rather than posting it in a public comment.
Make clear whether you need a part for a specific vehicle or are building stock for a wider application group. These two requests need different supporting information.
Photograph the interfaces, not just the front
Include an overall view, the mounting points, the pipe connections and any electrical connector. For belt-driven units, show the pulley face and its grooves. For other designs, record the external connections and identification labels without dismantling the assembly.
- Use one photograph per view, with the part in focus.
- Keep connector shapes and mounting holes unobstructed.
- Add a ruler beside dimensions you are asking the supplier to compare.
- Separate measured dimensions from values copied from an old listing.
Define what is included in your request
Write whether you are discussing a complete assembly or an individual component such as a clutch, pulley or control valve. If a photograph shows several items, identify which of them belongs in the requested supply scope.
Record any voltage, refrigerant or other specification printed on the component, without treating a partially readable label as confirmed information. Mark uncertain details as unknown so they can be reviewed.
Send a complete quotation brief
For each line, include your reference, the supporting OE or label number, requested quantity and destination. Keep photographs named with the same line identifier. If several versions are acceptable, explain that explicitly instead of submitting an ambiguous reference.
Browse A/C compressors, add relevant catalogue references to your enquiry list and include these details in the quotation request. A catalogue match is a starting point; agree the exact configuration before ordering.
Welcome to WordPress. This is your first post. Edit or delete it, then start writing!